W&T 57016, 230V DPDT Coupling Relay for Web-IO Digital
Coupling relay with two change-over contacts (DPDT), 15.8 mm wide, for DIN rail mounting with integrated EMC protection circuit and polarity reversal protection diode. Safe isolation between coil and contacts per VDE 0106, EN50178, EN60204 and EN60335.
Contacts specification:
- Number of contacts: 2 changeover (DPDT)
- Rated current/Maximum peak current: 8A/15A
- Rated voltage/Maximum switching voltage: 250V/250V (AC)
- Rated load AC1: 2000VA
- Rated load AC15 (230 V AC): 400VA
- Single phase motor rating (230 V AC): 0.3kW
- Breaking capacity DC1: 30/110/220V 8A//0.3A/0.12A
- Minimum switching load: 300mW
- Standard contact material: AgCdO
Coil specification:
- Nominal voltage: 24V DC
- Rated power: 0.5W
- Operating range: (0.8...1.5)UN
- Holding voltage: 0.4UN
- Must drop-out voltage: 0.1UN
Technical data:
- Mechanical life: 20,000,000 cycles
- Electrical life at rated load AC1: 100,000 cycles
- Operate/release time: 12ms/12ms
- Insulation between coil and contacts (1.2/50 µs): 6kV
- Dielectric strength between open contacts (AC): 1000V
- Ambient temperature range: -40°C...+70
- Protection category IP 20